A variety of different parts are used to enter or exit the working position according to the process requirements. In order for them to work in a coordinated manner, they must be controlled according to the weaving procedure.
The control mechanism consists of a bird frame, a chain, a speed plate, a push plate, a flower disk, a trigeminal frame, a large roll simple, a small roller and a support. The main control components are large rollers and small rollers that control the movement of the various triangles, yarn guides, density mechanisms and jacquard mechanisms. The rotation of the drum is controlled by a control mechanism such as a chain or a push plate. The face plate controls the one-way rotation or the reciprocating rotation of the syringe, and the speed plate controls the rotation speed of the syringe.
The pusher shaft is equipped with a speed disc, a pusher disc, a faceplate, a chain disc and a square-eye 48-toothed gear. The push plate is also one of the important parts in the control mechanism. The push plate and the push plate shaft are supported by the large strut. The positioning of the push plate is required during installation. It is aligned with the two head screws on the push plate. Two 8 mm tapers on the shaft. The relative position of the push plate and the shaft is not moved by the force, so the tip end of the screw head is ground and tapered, and is quenched to match the taper to avoid the surface of the shaft being rough and affecting the subsequent disassembly.
The position of the cone on the pusher shaft is on the same axis of the center of the 48-pin square pin. The first 8 mm taper is placed 150 mm from the left end of the shaft. Then, the pusher is put on the screw and the screw is tightened. The other screw hole position is used to set the second cone. The drill is used to make a mark on the shaft, the pusher is removed, and the second 8 mm cone is punched according to the position of the mark.
Explain the program control mechanism and function of the sock machine
We are the one of first manufacture who produced fully computerized socks knitting machine in China. It's cost performance can be instead of the same type of import products.At present we have the cotton socks machines are "5F", "6F", "terry", "7F-3D", "two-feed machine", "double-cylinder", and so on, anyway the silk stockings machines are "opus-640", "opus-645" and so on. On the put on the market, had gained the most support of our customers. And the machines exported to India, Thailand, Iran and other countries.
Zhuji City Weston Machinery Co., Ltd.
Tel: +86-575-87880887
Mob: +8613989515493
Fax: +86-575-87053568
Email: wsd1@wisdomknitting.com
